Do you have a vehicle from the MQB platform? If so, your vehicle will not have a separate plug for the camera. Instead, the camera connects directly through the vehicle's Quadlock cable.
Does your vehicle have a black plug with 26 pins for the original camera? If so, you have two solutions to get the original camera working with a new car radio.
Original camera with parking lines that rotate when you turn the steering wheel.
You need the AVN-C100 cable. Connect this directly to the original camera plug located in the trunk. Disconnect it from the module and connect it to the AVN-C100 cable. Then, connect the tulip plug of the AVN-C100 cable to the new car radio you purchased from us. Please note that the parking lines will no longer move when you turn the steering wheel.
Original camera with parking lines that do not rotate.
You need the AVN-C060 interface. Connect this directly to the 26-pin plug that you disconnected from the original car radio. Connect the yellow plug of the interface to our car radio. Don't forget to connect the loose wires of the interface as specified in the instructions.